Gardenique PPWUMW10 Guide d'installation Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
WARNINGS AND CAUTIONS – PUMP
WARNING
To reduce the risk of electric shock, be certain that it is connected only to a properly grounded,
grounding-type receptacle (GFCI).
Do not exceed the voltage shown on the transformer.
Do not submerge the transformer.
Always disconnect pump and transformer from the power source before beginning any maintenance or
work on the pump.
Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if
damage is found.
Risk of electrical shock: This pump has not been investigated for use in swimming pools or marine
areas.
CAUTION
This pump has been evaluated for use with fresh water only.
Use a proper power source as indicated on the transformer label.
Keep the cord away from high temperatures or other heat sources.
Do not pump heated liquids.
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
Operate in fresh water only. Avoid heavily chlorinated water and water with high pH levels.
Do not lift the pump by its power cord.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
Tools required for assembly: no tools required for assembly.
ASSEMBLY
INSTRUCTIONS
1. Adjust the flow control to the preferred setting. Adjusting the flow
control will prevent splashing when the pump is turned on. Fig 1
Fig. 1
Vue de la page 1
1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire